Solar Spy
Administration & Support | 800-764-7701 | 732-751-2700
Sales & Contracts | 800-278-3480 | 480-505-0177
Hemispheric Q22
Allround Easy. Allround Secure.
An elegant, ultra compact and weatherproof IP dome camera. Thanks to the 360° allround view to capture an entire room, a panorama function and a quad view to show images from four different angles simultaneously, the Q22 can be used in all new scenarios.
|
|
||
| MxEasy | Image correction | Digital zoom/pan |
Powerful performance in complete video solutions …
- Complete panorama view, ideal for access control
- Quad view to show images from four different angles simultaneously
- Digital, continuous zooming and panning
- Robust and maintenance-free, without mechanically moving parts
- Event-controlled, complete room recording directly in the camera
- Alarm function, speaker and microphone integrated
* 2008/06 • MSRP (Manufacturer’s suggested retail prices) • Prices ex works Charlston, South Carolina (SC), USA (EXW) • Excluding VAT and any other handling charges • Calculated at FXR EUR = 1.4842 USD, 11/27/2008 • Information subject to change without notice!
Technical Data
| Technical Specifications Hemispheric Q22 | |
|---|---|
| Models | Basic, Sec |
| Lenses | L11 (hemispherical) L22 (90° x 67°) |
| Sensitivity | Color: 1 lux (t=1/60 s), 0,05 lux (t=1/1 s) |
| Sensors | 1/2“ CMOS, progressive scan |
| Max. image resolution | Color: 2048 x 1536 (3 MEGA) |
| Image format | 2048 x 1536, 1280 x 960, 1024 x 768, 800 x 600, 768 x 576 (D1), 704 x 576 (TV-PAL), 640 x 480, 384 x 288, 352 x 288, 320 x 240, 160 x 120; free image format selection (e.g. 1000 x 200 for skyline) |
| Max. frame rate (M-JPEG) (Live/Recording) |
VGA: 16 fps, TV-PAL: 12 fps, MEGA: 6 fps, 3MEGA: 4 fps |
| Max. Video stream (MxPEG) (Live/Recording/Audio) |
VGA: 30 fps, TV-PAL: 24 fps, MEGA: 14 fps, 3MEGA: 10 fps |
| Image compression | MxPEG, M-JPEG, JPG, H.263 (Video-VoIP-Telephony) |
| Internal DVR | Slot for SD card (up to 16 GB) |
| External storage | Directly on NAS and PC/Server without additional recording software |
| Software (inclusive) | Video-Management-Software MxEasy, Control room software MxControlCenter |
| Image processing | Backlight compensation, automatic white balance, image distortion correction, video sensor (motion detection) |
| Virtual PTZ | Digital Pan/Tilt/Zoom, continuous 8x zoom |
| Alarm/Events | Triggering of events by integrated multiple-window motion detection, external signal, temperature sensor, notification over email, FTP, IP-Telephony (VoIP, SIP), visual/acoustic alarm Pre- and post-alarm images |
| Audio | Integrated microphone and speaker, lip-synchronous audio, two-way speaker, audio recording |
| Interfaces | Ethernet 10/100 |
| Audio/Telephony | VoIP, SIP, two-way speaker, remote controlling of the camera in- and outputs, event notification |
| Security | User-/Group management, HTTPS/SSL, IP address filter, IEEE 802.1x, Intrusion Detection |
| Certificates | BGV C9 (“UVV”), EMV (living environments, industry), EN 50155 (shock, vibration, temperature), CE, FCC |
| Power supply | Year-round Power over Ethernet (IEE 802.3af; Class 0), Netpower-Adapter, typ. 4 W |
| Operating conditions | IP65 (DIN EN 60529), -30° bis +60 °C (-22°F to +140°F) |
| Dimensions | Ø x H: 16 x 5 cm, Weight: ca. 450 g |
| Standard delivery | Housing (high-resistance composites – PBT-PC), white, lens protection (transparent polycarbonate), incl. 360° lens, mounting parts, allen wrench, patch cabel S/FTP yellow 8-wire 50 cm (double-shielded), manual, software |
Accessories
| Available Accessories Hemispheric Q22M | ||
|---|---|---|
Vandalism Housing for Q22 |
In-Ceiling Set for D22 and Q22 |
ExtIO Extension Module |
 |
 |
 |
|
|
|
Lenses
| Lens Table | ||
|---|---|---|
| Order name | L11 | L22 |
| Original image |
|
|
| 35mm equivalent | 11 mm | 22 mm |
| Focal length | 1.8 mm | 4 mm |
| Aperture | 2.0 | 2.0 |
| Image angle horizontally | 180° | 90° |
| Image angle vertically | 160° | 67° |
| Distance 1 m | m | m |
| • Image width | infinitely | 2.0 |
| • Image height | 11 | 1.3 |
| Distance 5 m | m | m |
| • Image width | infinitely | 10.0 |
| • Image height | 55 | 6.6 |
| Distance 10 m | m | m |
| • Image width | infinitely | 20.0 |
| • Image height | 110 | 13,3 |
| Distance 20 m | m | m |
| • Image width | infinitely | 40.0 |
| • Image height | 220 | 26.6 |
| Distance 50 m | m | m |
| • Image width | infinitely | 100.0 |
| • Image height | 550 | 66.0 |
| Note |
|---|
| The focal lengths of MOBOTIX lenses do not reflect the actual focal length of the lenses, but the focal length ( Lxx mm) converted to 35 mm camera format. For example, the MOBOTIX Super Wide-Angle lens has an actual focal length of 4 mm. This would be the equivalent of 22 mm on a 35 mm camera. This lens is thus called L22. |
| Since the image sensors in digital cameras have different sizes, converting to 35 mm camera as a known format provides for better comparing the image formats and the fields of vision of the different lenses. Another benefit is that you can easily set a 35 mm camera (analog or digital) to the same focal length (Lxx) to obtain the same field of vision. This approach greatly facilitates lens selection. |
Models
| Camera models | ||||
|---|---|---|---|---|
| MOBOTIX cameras are available in different models with various functions | BASIC | WEB | IT | SECURE |
| Maximum resolution VGA (640 x 480 pixels) |
|
|
||
| Maximum resolution 3MEGA (2048 x 1536 pixels) |
|
|
||
| PTZ function Digital pan, tilt, zoom without mechanically moving parts (software-driven) |
|
|
|
|
| Internal long-term storage in the camera Data storage up to 8/16 GB (CF/SD card, depending on model) |
|
|
||
| External data storage (via network by the camera) Recording up to 1 Terabyte on PC/Server/NAS |
|
|
||
| Image transfer is time- and event-driven Data transfer via FTP or E-Mail (web function) |
|
|
|
|
| Audio function Video recording with lip-synchronous audio |
|
|
||
| Available cameras | D22, Q22 | M12 | M12, M22, D12, D22 | all cameras |
| Detailed function overview of the cameras | ||||
 |
|
|
 |
 |
|
| Indoor/Outdoor: | Indoor (IP54), -30°…+50°C | In/Outdoor, weatherproof (IP65), -30°…+60°C |
| Lenses: (eq. 35mm) |
Hemispheric (11mm,360°,F2.0) Super Wide Angle (22mm,90°,F2.0) |
Hemispheric (11mm,360°,F2.0) Super Wide Angle (22mm,90°,F2.0) |
| Resolution: | VGA (640×480 pixels) | 3MEGA (2048×1536 pixels) |
| Pan/Tilt/Zoom: | Digital PTZ via MxControlCenter | Continuous up to 8x Zoom & Pan/Tilt (digital) |
| Frame Rate (Mono): | 16 fps VGA • 16 fps CIF | 30 fps VGA • 10 fps MEGA • 4 fps 3MEGA |
| Sensitivity: | 1 lux (t=1/60s) • 0,05 lux (t=1/1s) | 1 lux (t=1/60s) • 0.05 lux (t=1/1s) |
| Interfaces: | Ethernet 10/100 Mbps | Ethernet 10/100 Mbps, USB, ext. audio |
| Internal DVR: | ./. | Up to 16 GB with SD card |
| Audio/Telephony | ./. | Bidirectional, IP telephony (VoIP) |
| Power Supply • In/Out: | PoE or MX30V • ./. | PoE or MX30V • via ExtIO |
| Software Features: | Distortion correction in MxCC, FTP, E-Mail, video alarm management, Multiview | Distortion correction in the camera, FTP, E-Mail, video alarm management |
| Arming • Triggering: | ./. | 365-day schedule • multiple events |
| External Storage: | ./. | Up to 1 TB on PC/Server/NAS |
| Order No.: | MX-Q22Mi-Basic-D11 MX-Q22Mi-Basic-D22 |
MX-Q22M-Sec-D11 MX-Q22M-Sec-D22 |
| Price (net): |
from: $698.00 *
|
from: $948.00 *
|
Mounting
Mounting Options
Mounting to a Ceiling or Wall
The MOBOTIX Q22M has been primarily designed to be mounted to either ceilings or walls (in combination with the Wall Mount). The supplied L11 180° lens then allows monitoring the entire room from the bottom to the ceiling. The Q22M can also be mounted directly to a wall without using the wall mount. The cable entry of the Q22M is below the center of the camera’s back plate.
Installation Options
| On-wall mounting | |
| The On-Wall set can reliably protect external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules. |
|
| On-wall mounting with 10° incline | |
| This On-Wall set is identical to the regular On-Wall set, except that the mounted camera is inclined by 10 degrees. The incline makes it possible for the camera to deliver the best images even in demanding situations. |
|
| In-ceiling mounting | |
| The In-Ceiling set allows mounting the Q22M cameras in fake ceilings, for example. This type of installation provides optimum protection for the camera and reduces the visible profile to a minimum since the camera only protrudes 24 mm (1 in) from the ceiling. |
|
| Vandalism protection | |
| The Vandalism set provides added protection for Q22M cameras. The set consists of a robust stainless steel cover and a dome made of polycarbonate. A camera equipped with the Vandalism set is perfectly suited for applications in demanding environments (such as prisons, social hot spots, train stations, etc.). |
|
| Wall Mount | |
| The Q22M/D22M Wall Mount is the ideal solution for mounting the Q22M to walls for indoor and outdoor applications. The camera is absolutely dustproof and resistan against water jets (IP65). The wall mount also covers RJ45 wall outlets and has ample space for additional modules. |
|
| Pole Mount | |
| If you would like to mount the MOBOTIX Q22M to a pole, you should consider using the MOBOTIX Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow attaching the mount to poles with diameters between 60 and 180 mm (2.4 to 7.1 in). |
|
Mounting Types Q22
The MOBOTIX Q22M consists of the camera housing (motherboard and lens), the outer shell and the mounting ring.
|
|
|||
| On-Wall Set | |||
|
|
|
||
| In-Ceiling Set | |||
|
|
|||
| Vandalism Set | |||
|
|
Mounting Instructions
Outdoor Wall Mount
The Q22M/D22M Wall Mount is the ideal solution for mounting the Q22M to walls for outdoor applications.The camera is absolutely weatherproof (IP65). The wall mount has ample space for additional modules (UMTS, WLAN etc.).
The Wall Mount also covers RJ45 wall outlets and also has ample space for additional modules.
Pole Mount
If you would like to mount the MOBOTIX Q22M to a pole, you should consider using the MOBOTIX Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow attaching the mount to poles with diameters between 60 and 180 mm.
The Pole Mount is made from 3 mm white powdercoated stainless steel and is just as robust and maintenance-free as the outdoor Wall Mount.
Hints for Choosing a Good Mounting Position
In order to get the most out of the MOBOTIX Q22M, you should follow these mounting hints.
360° Allround View
| Thanks to its hemispherical lens, a single Q22M can monitor an entire room right into each of the four corners (360° Allround Surveillance). The camera’s ideal position is on the ceiling in the center of the room. Due to its inherent physical and optical properties, the precision of the lens decreases as the distance from the lens grows. This means that the maximum usable image area greatly varies with the purpose of the camera. Rooms with a square floor area of up to approx. 40 m² (48 yd²) in general allow recognizing details even at the borders of the full image. If you would only like to know if persons enter a room or for monitoring specific objects, rooms with up to 100 m² (120 yd²) floor area can be monitored using a single Q22M. |
|
Facial Recognition |
|
| If the camera is used to detect persons and recognize their faces, the camera should be mounted at heights between 2.8 and 3 m (9.2 to 9.8 ft). Facial recognition up to 1.5 m (5 ft) distance to the object is very good and up to 3 m (9.8 ft) is still sufficient. Persons that are already known can be properly identified up to 5 m (16.4 ft) distance from the camera. |
|
| Non-Square Rooms | |
| When viewing a 360° (full) image in the browser, you will notice that the top and bottom of the image is not fully visible, i.e. some image information has been clipped. This is not a fault of the camera, but an intended behavior that aims at achieving the best possible utilization of the image sensor by the camera software. Bearing this in mind, it is advisable to install a Q22M in rectangular rooms so that the arrow marked as OBEN /TOP points towards one of the long sides of the room as shown in the figure. |
|
| Lowered Mounting or Mounting on Extensions | |
| When mounting the camera in rooms with a high ceiling, it may be advisable tomount the camera in a lower position. This reduces the distance between the camera and the objects that are to be monitored, which in turn increases the recognizability of details. One practical solution would be to install the camera on a base plate attached to a suitable extension (metal tube) that is hanging from the ceiling. The network cable can be hidden from view by running through the interior of the tube. Similar to such a lowered mounting from the ceiling, you can also attach the camera to an extension mounted to a wall to better use the 360° image of the camera (e.g. outside, above a portal). Such an installation would use the pole mount accessory (MX-D22-OPT-MH) in conjunction with the wall mount (MX-D22-OPT-WH) as a sturdy camera carrier, which is then mounted to the extension pole. MOBOTIX recommends not to attach the camera directly to metal carriers, especially when mounting the camera outdoors or when the ambient temperature varies greatly. As an additional measure to protect the camera against condensation, you should use either the On-Wall set (MX-D22-OPT-AP) or the Wall Mount (MX-D22-OPT-WH). |
|
Connecting the Camera
The MOBOTIX camera does not require any software installation; all you need is your preferred browser with JavaScript support to operate the camera. Thus, the MOBOTIX camera is supported by all common operating systems (such as Windows, Macintosh and Linux, …).
If the camera is supplied with Power over Ethernet (a PoE switch), then no other device will be necessary for supplying power.
Establishing the Power Supply to the Camera
You can choose between the following options::
- External power supply and Network Power Adapter (MX-NPA-3-RJ): Power supply of one camera injected into the network cabling (max. length 100 m (110 yd)), from the NPA to the 10BaseT/NET connector of the camera
- Network Power Box/Rack (MX-NPR-4, or 8/20): Power supply of 4/8/20 cameras injected into the network cabling (max. length 100 m (110 yd)), from
the NPR to the 10BaseT/NET connector of the camera - Power over Ethernet: Power supply using network components that are conforming to the PoE standard IEEE 802.3af
Power Supply (MxPoE) Using a Switch
- Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
- Connect the LAN/Power connector of the NPA to an Ethernet connector of the switch/router or the Ethernet wall outlet.
- Plug the RJ45 connector of the external power unit into the PC/Power connector of the Network Power Adapter.
Power Supply (MxPoE) When Connected Directly to a Computer
- Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
- Connect the PC/Power connector of the Network Power Adapter to the Ethernet port of the computer.
- Plug the RJ45 connector of the external power unit into the LAN/Power connector of the Network Power Adapter.
Power Supply (MxPoE) Using a Network Power Rack or Network Power Box
- Connect the factory pre-installed cable of the camera to the CAM connector of the Network Power Rack (MX-NPR-8/20) or the Network Power Box
(MX-NPR-4). - Connect the LAN connector of the Network Power Rack to an Ethernet connector of the switch/router.
Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products
Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE switch/router. The switch/router needs to support the PoE standard IEEE 802.3af.
Turnkey Solutions
We work with each customer individually to design a turnkey solution that meets their individual specifications. Read on »
Copyright (c) 2009 Solar Spy, LLC